The influence of pulsed - TIG welding on the strength of Al-6Mg alloy

سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,666

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

AEROSPACE07_094

تاریخ نمایه سازی: 1 مرداد 1387

چکیده مقاله:

In order to evaluate the influence of pulsed current on the welded-joint strength, pulsed-TIG process was used to weld the A1-6Mg alloy is used strongly in aerospace structures. High strength of this alloy is dun to work hardening during manufacturing and existence of precipitates in its microstructure. During pulzed-TIG welding of this alloy, the effect of Time Ratio was studied on the welded-joint strength. To reach the maximum strength, Time Ratio had an optimum value which was equal to 1.6. At this Time Ratio the finest and the most uniform microstructure in the weld metal was achieved.

کلیدواژه ها:

pulsed TIG- Time ratio- 5xxx series alloys

نویسندگان

A Hadadzadeh

Department of Materials Science and Engineering, Sharif University of Technology, MS Student

M.M Ghaznavi

Department of Materials Science and Engineering, Sharif University of Technology, PhD Student

A.H Kokabi

Department of Materials Science and Engineering, Sharif University of Technology. Professor