Numerical Simulation of Combined (Impingement/Film) Cooling Technique

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,926

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

AEROSPACE08_129

تاریخ نمایه سازی: 5 شهریور 1388

چکیده مقاله:

The present paper describes a three-dimensional Finite Volume numerical simulation of flow and heat transfer in a combined cooling technique. The combined (impingement/film) cooling technique is used extensively in modern gas turbine engines for cooling of the hot gas-path components such as the turbine stator inner band. The governing equations are the fully elliptic, Reynolds-averaged Navier-Stokes equations. The SIMPLE algorithm is employed to correct the pressure term. The second order upwind scheme is used to discretize the convection terms. The (k- /SST) turbulence model is applied for the flow simulation. The mesh used is the body-fitted, multi-block grid system. Results on the variations of velocity and temperature profiles with geometrical parameters, at a fixed blowing rate ratio, for the combined cooling technique are presented. Comparisons of the present results on adiabatic cooling effectiveness for either 0 f the two cooling methods and also for the combined technique with the available experimental film cooling and numerical impingement cooling data indicate that the cooling effectiveness for the combined cooling is considerably enhanced

کلیدواژه ها:

Combined cooling-film cooling impingement cooling-turbulence modeling-adiabatic effectiveness.

نویسندگان

Farzad Bazdidi-Tehrani

Associate Professor, Department of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran (corresponding author)

Mehdi Amiri-Behgadam

M.Sc. Graduate, Department of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

Mehran Rajabi

PhD. Candidate, Department of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • A comparison betweem the present uumerical resuJs on film cooling ...
  • Han J.C., Dutta S. and Ekkad S., Gas _ Transfer ...
  • At adjacent film boles effectiveness becausc high blowing rate ratio ...
  • Copbined coolig tecbrique provides _ acceptable temperature distribution o tbe ...
  • Versteeg H.K. and Maladasekera W.. _ _ Computatiomal Fluzd Dmamics: ...
  • FLUENT User's Mamual, Version 6.0.12, 2005. ...
  • Patankar _ Nuperzcal Heat tranfer _ Fiw, McGraw-Hil Book Company, ...
  • نمایش کامل مراجع