Comparison of static and sismic bearing bearing capacity of strip foundation using slip line method
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 490
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CEUCONF03_113
تاریخ نمایه سازی: 16 شهریور 1395
چکیده مقاله:
Determination of static and especially seismic bearing capacity of foundation using slip lines method is one the interested method in geotechnics project because of its simplicity. In slip lines method, the stress equilibrium equations on the characteristic lines are solved using the finite difference method. In this research, to determine the static and seismic bearing capacity of foundation two programs were codded in MATLAB. For seismic analysis horizontal and vertical seismic coefficient were inserted in equilibrium equations. Comparison of the results shows that the proposed model can predicts close bearing capacity with respect to the literature. The results of sensitivity analysis show that the horizontal seismic coefficient and internal friction angle are the most effective parameters on bearing capacity of the strip foundation. The results indicate that earthquakes have a negative effect on the bearing capacity, so increase in the horizontal coefficient of the earthquake decrease the bearing capacity of the strip foundation significantly
کلیدواژه ها:
نویسندگان
A Johari
Department of Civil and Environmental Engineering, Shiraz University of Technology, Shiraz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :