Nanosize clay effects on morphology and kinetics of thermal degradation of PP/EPDM blends
محل انتشار: سومین کنفرانس نانوساختارها
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,206
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS03_078
تاریخ نمایه سازی: 21 دی 1388
چکیده مقاله:
Nanostructured materials based on organically modifyed montmorillonite and compatibilized polypropylene (PP)/ethylene propylene diene monomer (EPDM) blend were prepared via melt-mixing of PP, EPDM,nanoclay and PP-g-MA as compatibilizer in an internal batc mixer. The surface morphologies of the pristine blend and nanocomposites were studied by scanning electron microscopy (SEM). Results showed that the particle size of the dispersed EPDM phase was remarkably reduced upon the addition of a small amount of nanoclay (3%). The degree of dispersion of silicate layers in the blend matrix was characterized by X-ray diffractometry (XRD). Results showed that a relatively good dispersion of silicate layers occurred in the system and a mixture of exfoliated/intercalat structure was formed. Thermo gravimetric analysis revealed that nanoclay retarded the thermal decomposition process depending on its concentration. The improvement in thermal resistance of PP/EPDM blend was most profound in case of adding 3 wt.% nanoclay. The retarding process was assigned to the good dispersion of silicate layers which acted as thermal insulator and mass transport barrier in the system.
کلیدواژه ها:
نویسندگان
I Hejazi
Department of polymer engineering, Amirkabir University of Technology
J Seyfi
School of Chemical Engineering, University of Tehran
G Mir Mohammad Sadeghi
School of Chemical Engineering, University of Tehran
S Ghanbar
Department of polymer engineering, Amirkabir University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :