Optimum Design of Composite Laminates for Strength and Stability

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,114

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT02_013

تاریخ نمایه سازی: 24 مهر 1389

چکیده مقاله:

In this investigation a rectangular composite laminate with simple boundaries is optimized for total thickness subject to strength and stability constraints under multiple in-plane load conditions. Layer thicknesses, orientation angles, stacking order, and ultimately the total number of the layers required are the main variables in the optimization problem. Method of center points based on inscribed hyperspheres in the design space is the algorithm used in the angle domain optimization. Maximum strain criterion of failure is considered for strength, and the stability analyses are performed using energy method. Example is taken from the literature and superior results are found pointing out to the significance of the stacking order optimality. The method proposed exhibits high efficiency for such design optimizations involving Eigen-value analyses.

نویسندگان

Behrooz Farshi

Associate Professor, Iran University of Science and Technology

Seyyed Reza Mohammadi

Graduate Student, Iran University of Science and Technology

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Schmit, L.A. and Farshi, B. (1973). Optimum laminate design for ...
  • Schmit, L.A. and Farshi, B. (1977). Optimum design of laminated ...
  • Gurdal, Z., Haftka, R.T. and Hajela, P. (1999). Design and ...
  • Weaver PM Anisotropic elastic tailoring in laminated composite plates and ...
  • Grenestedt JL Layup optimization against buckling of shear panels. Structure ...
  • Lemanski SL, Weaver PM. Flap-torsion coupling in sandwich beas and ...
  • Bloomfield MW, Diaconu CG, Weaver PM. On feasible regions of ...
  • Weaver PM, Bloomfield MW. On the potential for elastic tailoring ...
  • Nagendra, S., Haftka, R.T. and Gurdal, Z. (1995). Advanced Technology ...
  • Jones, R.M. (1999). Mechanics of Composite Materials, 2nd Edition, Washington, ...
  • Timoshenko, S.P. and Gere, J.M. (1963). Theory of Elastic Stability, ...
  • Vanderplaats, G.N. (1984). Numerical Optimization Techniques for Engineering Design, McGraw-Hil. ...
  • نمایش کامل مراجع