Effect of Clay Nanoparticles’ Addition on Hardness and ThermalBehavior of Hollow PMMA Microspheres/Unsaturated PolyesterSyntactic Foam

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,390

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT04_098

تاریخ نمایه سازی: 22 مهر 1394

چکیده مقاله:

In the present research, the effect of clay nanoparticles’ addition on the thermal stability and hardness of thehybrid syntactic foams was studied. Morphology of the foam samples containing different wt % clay nanoparticles was determined using SAX. The thermal stability of foam samples containing 5 wt % of microspheres and 0, 1, 2 and 3 wt % of clay nanoparticles was evaluated using TGA. Rockwell hardness of samples was also measured according to ASTM D 785. The SAX analysis revealed exfoliated morphology for nano-clay platelets in foam sample containing 1 wt % nanoparticles, and it was changed to intercalated morphology, by increasing nanoparticles’ content. TGA results and hardness measurements revealed enhancing thermal stability and hardness of 1 wt % nano-clay embedded foamsamples. Further increasing nanoparticles’ content had no significant effect on hardness value changes; however TGA study showed decreasing of thermal stability –still over than neat sample - with increasing nano-clay content.

نویسندگان

A Farmany

PhD student, Department of Polymer Processing, Iran Polymer & Petrochemical Institute, P.O. Box: ۱۴۹۶۵-۱۱۵,Tehran, Iran.

M Esfandeh

Professor, Department of Polymer Processing, Iran Polymer & Petrochemical Institute, P.O. Box: ۱۴۹۶۵-۱۱۵,Tehran, Iran.

S.M Mirabedini

Professor, Department of Polymer Processing, Iran Polymer & Petrochemical Institute, P.O. Box: ۱۴۹۶۵-۱۱۵.Tehran, Iran