Experimental and Numerical Evaluation of composite-metal AdhesiveBonded Joints and Study on Effective Parameters

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 573

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT04_112

تاریخ نمایه سازی: 22 مهر 1394

چکیده مقاله:

There are a great attraction toward adhesively bonded structures because of their special properties foraerospace, marine and recently automotive structures. This work is focused to study adhesive bonded joints with single lap configurations. First, by the use of cohesive zone model (CZM), which is a powerful tool for the simulation offracture in bonded structures, the joint was modelled and validated according to various damage criteria. This model is used to investigate the effective parameters on the strength of adhesive bonded joints. Then, experiments was done tocompare the differences between a model and real experiments. Some parameters like failure load, damage initiation displacement and damage displacement, overlap length are presented and compared with FEM model. Finally, anoptimized joint configuration is proposed that with little modification is applicable through real adhesive bonded joints assemblies in order to increase joint’s strength and reduce damage initiation.

نویسندگان

E Sadeqzadeh Naeini

M.S. student, Department of Mechanical Engineering, University of Tehran, Tehran, Iran

M.R Farahani

Assistant Professor, Department of Mechanical Engineering, University of Tehran, Tehran, Iran

P Karami

M.S. student, Department of Mechanical Engineering, University of Tehran, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • V. Karatzas, Y. Zhang, N. Tsouvalis and M. Chrys santhopoulos, ...
  • M. Goland and . Reissner, Journal of applied mechanics, pp. ...
  • B. F. S8rensen and T. K. Jacobsen, Engineering fracture K. ...
  • mechanics, pp. 1841-1858, 2003. [7]. ...
  • نمایش کامل مراجع