Effect of clamping force on the residual stresses offlash butt welding

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,218

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

EASTTEHRANMECH02_096

تاریخ نمایه سازی: 9 تیر 1392

چکیده مقاله:

Flash butt welding is commonly used in the manufacture of continuously welded rails. This investigation performs an electro-thermo-mechanical analysis using finite element techniques to analyze residual stresses in two weldment plates, then we will compare the residual stresses with datasheets that have been published by Department of the US Army Corps of Engineering to evaluate them and we found the fine results. Element birth and death method was adopted to simulate metal melting during the welding process. At the end we survey the effect of clamping force on the residual stresses of flash butt welding procedure.

کلیدواژه ها:

نویسندگان

Seiied Parsa Haibatollahi

Master Student of Rolling Stock Engineering, School of Railway Engineering, Iran University of Science and Technology

Parisa Hoseini Tehrani

Professor of School of Railway Engineering, School of Railway Engineering, Iran University of Science and Technology

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • John Hicks, 2000. AWelded design - theory and Abington ...
  • Klas Weman, 2003. Welding process handbook. New York: CRC press. ...
  • Hasanifard Soran, 2007. Fatigue of spot welds. Doctoral Thesis. ...
  • Mous avizadeh. _ 2007. "Horizontal split-web fractures of flash butt ...
  • نمایش کامل مراجع