Design Earthquake Based on Deaggregation of Seismic Hazard
محل انتشار: هشتمین کنگره بین المللی مهندسی عمران
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,159
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCE08_081
تاریخ نمایه سازی: 28 آبان 1387
چکیده مقاله:
The disadvantage of probabilistic seismic hazard analysis is that the concept of a “design earthquake” is lost; i.e. there is no single event that for design or retrofit. The relative contributions of the various sources to the total seismic hazard are determined as a function of their occurrence rates and their ground-motion potential. This study describes a method wherein a design earthquake can be obtained that accurately represents the uniform Fourier hazard spectrum from a PSHA. If different seismic sources dominate the hazard at different frequencies, then contributions to the hazard come from significantly different magnitudes, distances, and ε’s. In this case, a single design earthquake is not appropriate and it is necessary to represent design earthquake for short and long periods.
کلیدواژه ها:
نویسندگان
Azad Yazdani
Assistant professor, Department of Engineering, University of Kurdistan, Sanandaj, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :