Seismic retrofit of a historical building in Tehran university museum using FRP technology and steel jacketing
محل انتشار: هشتمین کنگره بین المللی مهندسی عمران
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,974
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCE08_440
تاریخ نمایه سازی: 28 آبان 1387
چکیده مقاله:
In this paper evaluation of seismic capacity of a historical building is carried out. It had been used as a national library about 40 years ago. Also, before that, it had been constructed as a part of a Royal complex. This building has been constructed by traditional methods using bricks and mortars. The ceilings system of the structure consists of jack arches. Also, the roof of the building has been constructed with wood trusses. The building does not have any designed lateral bearing system. Lateral resistant of the building is due to masonry walls and due to brittle and non-ductile performance of it. In secondary cycles of earthquake vibration, it will loose its stiffness and strengthening radically. Also the building
does not have any reliable about integrity. Load bearing systems are not reliable too. In this paper the evaluation of resistant capacity of the building is established and the weak points of the system are distinguished. For some masonry columns some traditional method of steel jacketing is designed and for increasing the reliability of the columns, FRP sheets are applied. In order to retrofits the walls, FRP sheets are installed on its surfaces, the externally bonded FRP sheets are strengthening the wall against in-plane and out of plane applied horizontal forces. Combination of the steel jacketing and externally bonded FRP sheets is prescribed to achieve an integrated system of the elements.
کلیدواژه ها:
نویسندگان
Omid Rezaifar
Assistant Professor, Faculty of Civil Engineering, Semnan University, Semnan, Iran
Majid Gholhaki
Assistant Professor, Faculty of Civil Engineering, Semnan University, Semnan, Iran
S. Hemmati
Faculty member, Faculty of Civil Engineering, Semnan University, Semnan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :