Numerical Modeling of Flow in Open Channel with a Side Concavity
محل انتشار: نهمین کنگره بین الملی مهندسی عمران
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,217
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCE09_1206
تاریخ نمایه سازی: 7 مهر 1391
چکیده مقاله:
In this article, flow patterns in a channel with a side concavity are studied numerically. The twodimensional depth-averaged saint venant equations, including the turbulence terms, are solved. Thealgorithm applies the finite volume method of Roe-TVD with unstructured triangular cells. Three depthaveraged turbulence models, including the mixing length, k and algebraic stress model (ASM) are used to close the hydrodynamic equations. The numerical results are compared with the availablenumerical and experimental data. It is clearly shown that the two-dimensional finite volume method ofRoe-TVD using the shallow water equations can estimate the flow depth variations and vortices in a side concavity, successfully. It is concluded that by increasing the aspect ratio the water depth enhances within the concavity section and the finite volume method of Roe-TVD with the ASM gives the best results
کلیدواژه ها:
نویسندگان
E. Alamatian
Assistant Professor, Khavaran Institute of Higher Education, Mashhad, Iran
M. R. Jafarzadeh
Professor, Department of Civil Engineering, Ferdowsi University of Mashhad, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :