Simulation & Controller Design To Optimization Of Combustion Systems Using Micro‐controller

The most important parameter controlling approach using a microcontroller. The control also has a special place in Chemical Engineering. The required accuracy for the control of chemical engineering equipment is sensible. Method for increasing the efficiency of flare in chemical engineering using digital control sensor to precisely control the combustion parameters Severely reduced the rate of emissions and increases efficiency, For example, oxygen and nitrous oxide sensor (for fuel with high heat accumulation) and other sensors. Most important sensor in Chemical Engineering at the refinery is sulfur dioxide. It is widely applied in the HSE and other sensors that are listed in full HSE laws. Systems to alert operators based in the area and multi‐fuel burner system which uses the Emission Reduction System(ERS) works. Can be used to input data to the micro‐controller ATX MEGA 128A3. More than fuel density and viscosity differences existing uses to identify and reacts to the stoichiometric air and also built a system that can be used gaseous fuel. Another device is set up foreach fuel type, time and manpower associated with the. the error is removed and the micro‐controller is a preciselycontrolled. Automation needed parameter control computations. Combustion. Electronic get digitally in the following, we will see that the above calculation method.

کلیدواژه ها:

Emissions ، combustion multi fuels. HSE ، . Optimization ، micro‐controller ، ATX MEGA 128A3. ، Adaptaon ، control