FLEXURAL CHARACTERISTICS OF STEEL FIBRE REINFORCED SELF COMPACTING CONCRETE BEAMS

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,112

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCT01_080

تاریخ نمایه سازی: 19 شهریور 1388

چکیده مقاله:

Fibre reinforced concrete with steel fibres attracted the attention of engineers and researchers during the last five decades. In recent times, self compacting concrete has been accepted as a quality product and are widely used. A large number of studies are available with respect to several parameters viz., flexural strength, load deflection behaviour, toughness, ductility, crack control, effects of beam dimensions, concrete filling sequence, flexural toughness parameters etc., of Conventional Fibre Reinforced Concrete. The present study aims to study the flexural behaviour of SCC beams with steel fibres. An experimental programme has been designed to cast and test three plain SCC beams and six SCC beams with steel fibres. The experimental variables were the fibre content (0Vf%, 0.5Vf% and 1.0Vf %) and the tensile steel ratio (0.99%, 1.77% and 2.51%). The type of fibre configuration used was crimped fibre 30mm in length, an equivalent diameter of 0.5mm and with stirrups of 2L-8 mm dia bars @ 150mm c/c. The SCC design mix was proportioned to obtain a compressive strength of 70 MPa and yield strength of steel used was 595 MPa. The experimental constants were the geometry of the beams (2000x125x250)mm as well as the test set up. A series of trials was made to obtain a suitable mix proportioning of SCC based on “Nan Su et al” method. The cracking, deflection and ultimate failure behaviour were experimentally studied. The available theoretical formulae proposed by Suji et al and Samir for FRC beams with conventional vibrated concrete beams were examined for the case of SFRSCC beams with respect to load deflection behaviour, ultimate moment, deflection and width of crack at service loads. A simplified effective moment of inertia function is proposed for the estimation of deflections of SFRSCC beams at all stages of loading. The results are presented and discussed.

کلیدواژه ها:

نویسندگان

Mohammad Soleymani Ashtiani

Dept of Civil Eng, M.S.Ramaiah Institute of Technology, Bangalore-۵۶۰۰۵۴, India

M Vinay

Dept of Civil Eng, M.S.Ramaiah Institute of Technology, Bangalore-۵۶۰۰۵۴, India

M Vijayanand

Dept of Arch, M.S.Ramaiah Institute of Technology, Bangalore-۵۶۰۰۵۴, India

K.U Muthu

Dept of Civil Eng, M.S.Ramaiah Institute of Technology, Bangalore-۵۶۰۰۵۴, India

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • 53 ).90 ).82 ).86 ).88 ).89 ).87 ).92 ).88 ).87 ...
  • 83 63.75 10.80 11.00 10.40 11.00 11.20 10.60 10.60 12.20 ...
  • Mohammed Sonebi, Adil K. Tamimi, and Peter J.M. Bartos, Performance ...
  • Ganesan.N, Indira.P.V. and Santhosh Kumar.P.T., Ultimate strength of steel fibre ...
  • Moncef Nehdi and Jennifer Duqutte Ladanchuk, Fibre synergy in fibre- ...
  • Hemanth.B .Dhonde, Mo.Y.L, HsuT.C. and John Vogel, Fresh and hardened ...
  • Nan Su, Kung-Chung Hsu and His-Wen Chai, A Simple mix ...
  • Nan Su, Maio B, A New method for mix design ...
  • ACI 318, Building code requirements for structural concrete and commentary, ...
  • Suji.D., Natesan.S.C., and Murugesan.R., Experimental study on behaviour of polypropylene ...
  • Lok.T.S., and Xiao.J.R., Flexural strength assessment of steel fiber reinforced ...
  • Samer A. Ezeldin and Cheng-Tzu Thomas Hsu., Optimization of reinforced ...
  • RILEM TC 162-TDF, Test and design methods for stee] fibre ...
  • Bertil Persson, A Comparison between mechanical properties of self- compacting ...
  • نمایش کامل مراجع