seismic performance improvement of existing precast buildings using dissipative devices
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,542
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCVAF01_070
تاریخ نمایه سازی: 13 مرداد 1390
چکیده مقاله:
this paper investigates a new type of friction damper for improving seismic performance of precast concrete frame structures. The friction damper is used externally at selected beam-to-column joints of the frame to dissipate energy during severe earthquakes a simplified model describing the hysteretic behaviour of the friction device was developed and parametric analyses were carried out in order to establish the optimum value of the slip force of the device for the different precast structures. the effectiveness of the dissipative friction device was numerically assessed on different typologies of precast structures by performing nonlinear dynamic analyses. the results of the numerical investigations showed that the introduction of the devices caused an increase of the dissipative capacity of the buildings.
کلیدواژه ها:
نویسندگان
marco valente
dipartimento di ingegneria strutturale , piolitecnico di milano piazza leonardio da vinci ۳۲
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :