Application of Central Composite Design for Ag+ and Zn2+ adsorption on analcime and modified analcime zeolites using AA spectroscopy
محل انتشار: کنفرانس بین المللی مهندسی و علوم کاربردی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 527
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICEASCONF01_504
تاریخ نمایه سازی: 9 مرداد 1395
چکیده مقاله:
This study describes response surface methodology (RSM) using Central Composite Design (CCD) was employed to optimize the conditions of independent variables (adsorption time and ion solution concentration) for the removal of Zinc (II) and Ag ions from the aqueous solutions using analcime and modified analcime zeolites (Fe-ANA and Ni-ANA) as efficient and low cost adsorbent. The operation conditions in this paper were contact time 1-13 hours and ion concentration of 25-250 ppm at ambient temperature. Under these conditions the response (the adsorption capacity of zinc (II) and Ag ions) was fitted by a quadratic polynomial regression model and linear model analysis in five-level-two-factor CCD using Design Expert software. The optimal conditions (high removal efficiency) for zinc (II) and Ag+ adsorption were achieved. The analysis of variance demonstrated that ion concentration effect was found to be significant in adsorption process. Moreover, actual and predicted response plot of ion adsorption in zeolites were investigated.
کلیدواژه ها:
نویسندگان
Maryam Yousefpour
Department of petroleum engineering, Nour Branch, Islamic azad university, Nour, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :