Influence of process variables on instability of crude oil-water emulsion
محل انتشار: پنجمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,396
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC05_216
تاریخ نمایه سازی: 7 بهمن 1386
چکیده مقاله:
The effect of temperature, pH, and demusifier's dosage on emulsion instability of Doroud 1, Abuzar, and Forouzan crude oil produced at Kharg Island (Iran) was investigated. Increase in temperature accelerated the solubility of resins and asphaltene present in the crude oil and significantly decreased the interfacial tension between the two phases. Experimental results showed that, optimum temperature for instability of three mentioned emulsions was about 60- 65°C and the emulsions was more stable at lower than 40°C. The emulsion stability decreased
with demulsifier dosage, because of decreasing interfacial tension. The optimum pH and dimulsifier dosage (at 60°C) for three emulsions were about 8-10 and 20-25mg/l respectively.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :