The application of heat pipe for designing uniform temperature batch reactor
محل انتشار: پنجمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,384
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC05_270
تاریخ نمایه سازی: 7 بهمن 1386
چکیده مقاله:
In the experimental investigation carried out, the performance of a two-phase closed thermo-siphon (heat pipe) with water as the working fluid for thermal control batch reactor was studied. And the effect of some operation variables such as time, input heat power, filling ratio and materials on the reactor temperature were studied. The experiments performed in the filling range of 30%-80% and input heat power between 200- 1200 watt and the temperature uniform in the reactor, heating time and Optimal filling ratio were studied. The results obtained in this research project were the consistency of the temperature inside the reactor and the optimal filling ratio. Also, the results of this experiment are useful in design, optimization of heat pipe and control of reactor temperature.
کلیدواژه ها:
نویسندگان
Hamed Mosavian
Chem. Eng. Dept., Engineering Faculty, Ferdowsi University of Mashhad, I.R.IRAN
Jafari
Chem. Eng. Dept., Islamic Azad University of Quchan, I.R.IRAN
Noie
Chem. Eng. Dept., Engineering Faculty, Ferdowsi University of Mashhad, I.R.IRAN
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :