Modeling and Simulation of Self-Lifting Method for Suppressing of Severe Slugging in Pipeline Risers
محل انتشار: هفتمین کنگره ملی مهندسی شیمی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 521
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_232
تاریخ نمایه سازی: 25 فروردین 1394
چکیده مقاله:
Riser-slugging is a flow regime that can occur in multiphase pipeline-riser systems, and is characterized by severe flow and pressure oscillations. This causes large problems in downstream facilities such as: separators on the platform. Reducing undesired slugging effects can have greateconomic benefits. In this research a technique to remove severe slugging in the pipeline systems by using of an active bypass or self-lifting method has been investigated. A simplified dynamic model has been developed for the simulation of applying self-lifting method in pipeline risers. Theproposed simple model has been compared with the rigorous model suggested in the literature as well as OLGA simulator. The simulation results show that the simple model presented in this work has a good agreement with the above mentioned rigorous models.
کلیدواژه ها:
نویسندگان
Reza Eslamloueyan
Corresponding Author Address: School of Chemical and Petroleum Engineering, Shiraz University, Shiraz
Hamed Nouryzadeh
Corresponding Author Address: School of Chemical and Petroleum Engineering, Shiraz University, Shiraz
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :