Modeling the Emulsion Polymerization in the Presence of coagulation:Monodisperse versus Polydisperse Particle Size simulation
محل انتشار: هفتمین کنگره ملی مهندسی شیمی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 548
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_555
تاریخ نمایه سازی: 25 فروردین 1394
چکیده مقاله:
In this work the batch emulsion polymerization of styrene has been modeled in presence and absence of coagulation phenomenon. The monodispersity assumption has been compared with the case were polydispersity of particle size is taken into account. The effect of particle dispersity on the evolution of the total particle numbers, conversion, the particle size and its distribution were studied. Neglecting the coagulation phenomenon, both monodisperse and polydisperse models predicts almost the same trend for variation of the number of particles, conversion and average particle radius. In the case of particle coalescence, the average particle radius can be predicted well in both models. However there is a high deviation in total number of particles and conversion for monodisperse model because of poor ability to determine the rate of coagulation.
کلیدواژه ها:
نویسندگان
Amir H. Navarchian
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan
Samira Feiz
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan
Elham Haj-Sadeghi
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :