Effect of curing conditions on compressive strength of activated phosphorous slag
محل انتشار: هفتمین کنگره ملی مهندسی شیمی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 591
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_767
تاریخ نمایه سازی: 25 فروردین 1394
چکیده مقاله:
The rate of hydration and the resulting compressive strength and other properties of cements depend on the curing process. Hydration of cement continues for years at a decreasing rate as long as the mixture contains water and the temperature conditions are favorable. This paper reportsresult of a study conducted to investigate the effect of curing time and temperature on thecompressive strength development of activated phosphorous slag (APHS). The mortars specimenswere prepared with PHS 80% wt, Type II Portland cement 10% wt, and insoluble activator 10%wt. They were cured in lime-saturated water at temperatures of 25 ºC, 45 ºC, 65 ºC, and 85 ºC. The results show that the curing temperature and time have a significant influence on the compressive strength development of PHS.
کلیدواژه ها:
نویسندگان
ali Allahverdi
Cement Research Center, School of Chemical Engineering, Iran University of Science and Technology, Narmak ۱۶۸۴۶۱۳۱۱۴, Tehran, Iran
Shima Pilehvar
Cement Research Center, School of Chemical Engineering, Iran University of Science and Technology, Narmak ۱۶۸۴۶۱۳۱۱۴, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :