An experimental approach to Abrasive Flow Machining (AFM) process

سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,635

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME07_015

تاریخ نمایه سازی: 6 آذر 1388

چکیده مقاله:

A non-conventional finishing method known as abrasive flow machining (AFM) is used to deburr, radius, polish and remove layer of components in a wide range of applications. The process is relatively new. A semisolid viscoelastic/ visco-plastic abrasive-laden mixture was used to remove material. The process embraces a wide range of feasible applications including automotive parts, aerospace, oil industry, medical components, etc. After design and built of a the apparatus, the effects of different parameters such as number of cycles, abrasive media flow speed, abrasive mesh size, and concentration of abrasive on material removal and surface finishes were studied. The experiments showed that AFM process results in high quality surface finishes

کلیدواژه ها:

Abrasive flow machining (AFM) ، Surface Finish ، Material Removal (MR)

نویسندگان

M Alitavoli

Assistant professorDepartment of Mech. Eng., University of Guilan,Rasht, Islamic Republic of Iran

M Mehran

Formerly Graduate student

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Rhoades, L. J., "Abrasive Flow Machining: A Case Study, " ...
  • Rhoades, L. J., "Abrasive Flow Machining, " Manufacturing Engineering, 75-78 ...
  • Tom Kohut, Surface finishing with abrasive flow machining, _ technical ...
  • R.E.Williams, K. P. Raj _ rkar, Stochastic modeling and analysis ...
  • R.E.Williams, K. P. Rajurkar, Metal removal and surface finish characte ...
  • R. E.Williams, K. P.Rajurkar, L.J. Rhoaders, performance ch aracteristics of ...
  • L.J.Rhoadees, Abrasive flow machining, Manufacturing Engineering, November (1998) 75-78. ...
  • L.J.Rhoadees, Abrasive flow machining and its uses, on-traditionl Machining Conference ...
  • L.J.Rhoadees, Abrasive flow machining: a case study, Journal of Materials ...
  • L.J.Rhoadees, Abrasive flow machining: a process for surface finishing and ...
  • Tehran Internationl Congress on Man ufacturing Engineering (TICME2005) December 12-15, ...
  • V. K. jain, S.G.Adsul, Experimental investigations into abrasive flow machining, ...
  • M.Alitavoli, A.Darvizeh, M.Mehran, _ Iranian Manufacturing Engineering Conference, 22-25 Dec ...
  • M.Mehran, An experimental approach to AFM process, M.Sc.thesis, Department of ...
  • نمایش کامل مراجع