Cutting Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Cryogenic Machining

سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,381

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME07_022

تاریخ نمایه سازی: 6 آذر 1388

چکیده مقاله:

Machining of steel inherently generate high cutting temperature, which not only reduces tool life but also impairs the product quality. Conventional cutting fluids are ineffective in controlling the high cutting temperature and rapid tool wear. Further they also deteriorate the working environment and lead to general environmental pollution. Cryogenic cooling is an environment friendly clean technology for desirable control of cutting temperature. The present work deals with experimental investigation in the role of cryogenic cooling by liquid nitrogen jet on cutting temperature, tool wear, surface finish and dimensional deviation in turning of AISI 1060 steel at industrial speed-feed combination by coated carbide insert. The results have been compared with dry machining and machining with soluble oil as coolant. The results of the present work indicate substantial benefit of cryogenic cooling on tool life, surface finish and dimensional deviation. This may be attributed to mainly reduction in cutting zone temperature and favorable change in the chip-tool interaction. Further it was evident that machining with soluble oil cooling failed to provide any significant improvement in tool life, rather surface finish deteriorated.

کلیدواژه ها:

Turning ، Steel ، Cryo-cooling ، Coated carbide ، Wear and Product quality

نویسندگان

N.D Dhar

ProfessorDepartment of Industrial & Production Engineering Bangladesh University of Engineering & Technology Dhaka, Bangladesh.

M Kamruzzaman

Lecturer, Department of Mechanical Engineering, DUET, Gazipur, Dhaka, Bangladesh

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • All lndia "98 _ .rocم using _ _ Soft Materia ...
  • B. Ackroyd, "Exploration of Contact Conditions in Machining." Proc. of ...
  • M. C. Shaw, J. D. Pigott and L. P. Richardson, ...
  • M. E. Merchant, "The Physical Chemistry of Cutting Fluid Action" ...
  • C. Cassin and G. Boothroyed, "Lubrication Action of Cutting Fluids" ...
  • Tehran Internationa Congress On M anufacturing Engineering (TICME2005) December 12-15, ...
  • Mazurkiewicz, M., Kubula, Z. and Chow, J., "Metal Machining with ...
  • Ecologically improved manufacturing processes http://www. ifw. _ n i-han nover.de/ ...
  • M. Sokovic and K. Mijanovic, "Ecological Aspects of the Cutting ...
  • A. Farook, A.S. Varadarajan and P.K. Philip, "Machinability Studies on ...
  • A. Alaxender, A.S. Varadarajan and P .K. Philip, "Hard Turning ...
  • Cutting Fluid: A Viable _ Alternative _ _ Floor." _ ...
  • H. Thoors and _ Chand rasekaran _ "Influence of the ...
  • S. Pauul and A.B. C hattopadhyay, "A Study of Effects ...
  • S. Paul and A.B. Chattopad hyay, "Effects of Cryogenic Cooling ...
  • S. Pauul and A.B Chattopad hyay, "The Effect of Cryogenic ...
  • A. Bhattacharya, T. K. Roy and A. B. Chattopad hyay, ...
  • K. Uhera and 3 Kumagai, "Chip Formation, Surface Roughness, Cutting ...
  • K. Uhera and . Kumagai, "Mechanisms of Tool Wear." Journal ...
  • A. D. Fillipi and R. Ippolito, "Face Milling at 180C." ...
  • C. Evans, "Cryogenic Diamond Turning of Stainless Steel", CIRP, 40/1, ...
  • N. R. Dhar, S. Pauul and A.B. Chattopad hyay, "Role ...
  • N. R. Dhar, S. Paul and A.B. Chattopad hyay, "FEM ...
  • N. R. Dhar, S. Paul and A. B. Chattopad hyay, ...
  • S. Islam, "Effects of Cryogenic Cooling by Liquid Nitrogen Jet ...
  • S. Hong, X. Qu and A. Lee, "Economical Cryogenic Milling ...
  • Tehran Internationa Congress On M anufacturing Engineering (TICME2005) December 12-15, ...
  • Z. Y. Wang and K. P. Rajurkar, "Wear of CBN ...
  • Z.Y. Wang, K.P. Rajurkar and M. Murugappan, "Cryogenic PCBN Turning ...
  • نمایش کامل مراجع