Microstructure and Cutting Performance Investigation of Ti(C,N)-Based Cermets Containing Various Types of Secondary Carbides
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,538
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_060
تاریخ نمایه سازی: 6 آذر 1388
چکیده مقاله:
In this paper the effects of type and amount of various secondary carbides on the microstructure and cutting performance of Ti(C0.7N0.3)-12Co system have been investigated. Nine model alloys with different amount of WC, Mo2C and Ta0.7Nb0.3C additives were studied using scanning electron microscopy (SEM), Vickers hardness (HV), transverse rupture strength (TRS) and continuous turning tests. Alloys including Mo2C and WC presented finer carbonitride grain structure, as well as higher wear resistance resulting from their higher hardness and highly solution hardened binder phase.
کلیدواژه ها:
نویسندگان
V Rahimi Dizaji
MSc. Student of Material Science and Engineering, Sharif University of Technology, Tehran, Iran.
H Dalir
MSc. Student of Mechanical Engineering, Sharif University of Technology, Tehran, Iran.
M Faghihi Sani
Assistant Professor of Material Science and Engineering, Sharif University of Technology, Tehran, Iran
Z Nemati
Associate Professor of Material Science and Engineering, Sharif University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :