Dynamic Analysis of High Speed Spindles Based on a Simplified Model for Angular Contact Bearings
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,614
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME08_001
تاریخ نمایه سازی: 27 آبان 1388
چکیده مقاله:
Accurate and realistic modeling of high speed spindles is essential for design of precision high speed machine tools. The bearings play an essential role in the dynamic performance of the spindles and their behavior is usually nonlinear. In this work, a five DOF simplified model for angular contact ball bearings is presented which takes into account the effects of high speed rotation on variation of the contact angles of the inner and the outer rings of the bearing. The model uses an average contact angle calculated at each rotational speed. It is shown that considering the changes in contact angles has a small effect on dynamic behavior of the bearing for typical range of spindle speeds currently available on most high speed machine tools. Therefore, the presented model can be safely used for modeling of the spindle bearings in such spindles with reasonable accuracy and reduced computational cost.
کلیدواژه ها:
نویسندگان
M. Masjedi
Research Assistant School of Mechanical Engineering,,Sharif University of Technology, Tehran, Iran
M.R Movahhedy
Associate Professor, Corresponding Author School of Mechanical Engineering,,Sharif University of Technology, Tehran, Iran
M Behzad
Associate Professor School of Mechanical Engineering,,Sharif University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :