Identification of Tool Life and Wear Characteristics of HSS Tools Used in Turning of Ck45

سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,767

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME08_097

تاریخ نمایه سازی: 27 آبان 1388

چکیده مقاله:

Cutting tools can be used when they do not reach tool life criteria and can produce parts with desired surface finish and dimensional accuracy. When the cutting edge of the tool reaches one of the tool life criterion, the tool should be replaced by a new one or sending it for regrinding [1]. During cutting operations, the cutting tool experiences various stresses such as normal, shear and also thermal shocks. These stresses cause wear and breakage of cutting edge. Tool wear is defined as a gradual loss of tool material at contact zones of workpiece and tool material, resulting the cutting tool reaches its life limit [2]. This research is based on ISO3685 and investigates the flank wear patterns of HSS tools during machining of CK45. It also determines the effects of cutting conditions on Taylor tool life equation.

کلیدواژه ها:

نویسندگان

B Moetakef Imani

Assistant Professor of Mechanical Engineering

S.A Hosseini

M.Sc. Student of Mechanical Engineering

A. Baghal Safa

B.Sc. Student of Mechanical Engineering

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Altintas, Y., "Manufactu ring Automation", Cambridge University Press, 2000. ...
  • Tlusty, G., "Manufactu ring Processes and Equipment", Prentice Hall, 1999. ...
  • ISO 3685, Tool life testing with single point turning tool, ...
  • Shaw, Milton C, "Metal Cutting Principles", CBS Publishers 8 Dstributers, ...
  • Moetakef imani, B., Nejatpoor, R. and Hosseini, S.A., ' l ...
  • Part _ using _ Processing _ CAD Algorithm, _ Annual- ...
  • Moetakef imani, B., Layegh, S.E. and Hosseini, S.A., ' " ...
  • Trent, E.M. and Wright, P.K., ' " Metal Cutting", Butterworth- ...
  • نمایش کامل مراجع