Finite Element Analysis of Weld Induced Residual Stresses in Two Dissimilar Pipes
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,690
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME08_107
تاریخ نمایه سازی: 27 آبان 1388
چکیده مقاله:
In most industrial applications dissimilar metal joining is unavoidable. The joining of dissimilar metals is generally more challenging than that of similar metals because of differences in physical, chemical and mechanical properties of the base metals welded. In the present work Manual Metal Arc Welding of austenitic stainless steel to carbon steel were studied. The Schaeffler diagram were used in determining suitable filler metal for this process, and then the finite element analysis of residual stresses in butt welding of two dissimilar pipes is performed with the commercial software ANSYS, which includes moving heat source, material deposit, temperature dependant material properties, metal plasticity and elasticity, transient heat transfer and mechanical analysis. Welding simulation considered as a sequentially coupled thermo-mechanical analysis. The element birth and death technique was employed for simulation of filler metal deposition.
کلیدواژه ها:
نویسندگان
S Nadimi
Mechanical Engineering Department, University of Tabriz, Tabriz, Iran University lecturer
A Mostafapour
Assistant professor
T.N. Chakherlou
Assistant professor
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :