Multi Level Optimization of Tube Hydroforming Process
محل انتشار: نهمین کنفرانس مهندسی ساخت و تولید
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,859
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME09_116
تاریخ نمایه سازی: 5 آبان 1388
چکیده مقاله:
In tube hydroforming, the loading path that is the relationship between axial feeding displacement and the internal fluid pressure is major significance. Researchers have employed various optimization approaches to find a better loading path. In this research a statistical method based on finite element analysis has been used. An accurate FEA has been used to simulate the process and find the response of the process to the loadings. The Response Surface Method (RSM) has been used to model the responses from the finite element analysis. The behaviour of the process can be predicted using this model. The optimization of the process is then applied to the model. The thickness variance has been considered as the objective function and the bulge height as the constraint. The optimum loading path found which satisfactory results
کلیدواژه ها:
نویسندگان
S.Y. Ahmadi-Brooghani
Assistant professor , Dept of Mechanical Engineering of Birjand University
Kh. Khalili
Assistant professor , Dept of Mechanical Engineering of Birjand University
E. Eftekhari shahri
PhD Student, Dept of Mechanical Engineering of Birjand University
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :