Optimization of Molding Parameters by Taguchi Method leading to minimum Shrinkage and In-mold pressure
محل انتشار: دهمین کنفرانس ملی مهندسی ساخت و تولید
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,769
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME10_102
تاریخ نمایه سازی: 29 آبان 1388
چکیده مقاله:
Plastic injection processes comprise injection, packing, cooling, ejection and process/part quality control applications. These steps are followed for the plastic parts in design phase.In this study, Moldflow software is used in order to collection responses to minimize shrinkage of part as a failure and minimize in-mold pressure as a factor that significantly affect the quality of injection molded plastic parts. Mold temperature, melt temperature and gate location are considered as model variables. Taguchi technique is utilized to obtain the optimal combination of design parameters. Also Analyze of Variance is done to evaluate the effect of processing parameters on responses. The results indicate that melt temperature has maximum effect on objects.
کلیدواژه ها:
optimization- plastic injection molding- process parameters
نویسندگان
S.Mehdi Alialmoussavi
M.S. student, Faculty of Mechanical Engineering, Urmia University
Taher Azdast
Assistant Professor, Faculty of Mechanical Engineering, Urmia University
Maghsud Solimanpur
Associate Professor, Faculty of Mechanical Engineering, Urmia University