Design and Evaluation of Feasibility Study of Friction Stir Welding of Thermoplastic Polypropylene Sheets

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,235

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME10_370

تاریخ نمایه سازی: 29 آبان 1388

چکیده مقاله:

The feasibility of friction stir welding has been studied on polypropylene sheets. The experiments have been designed with taguchi method. The joint strength has been analyzed based on three parameters of translation speed, rotation speed and geometry of the tool. The optimum welding condition has been determined through a statistical analysis. It has been demonstrated that tool geometry has an important role in the seam brittleness due to the material flow during welding.

کلیدواژه ها:

Friction stir welding – Polypropylene Sheets – Optimum condition

نویسندگان

S Saeedy

M.S. Student, Faculty of engineering, department of mechanical engineering, university of Tehran

M Besharati Givi

Associate Professor, Department of mechanical engineering, university of Tehran

N Sadeghian

Ph.D. Student, Department of mechanical engineering, university of Tehran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • S.T. Amancio-Fi lho, J.F. dos Santos, "Joining of Polymers and ...
  • R. S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, A.K. ...
  • A. Arici, T. Sinmaz, "Effects of double passes of the ...
  • Z. Kiss, T. Czigany "Applicability of friction stir welding in ...
  • نمایش کامل مراجع