Modeling of an Adiabatic Fixed-Bed Reactor for Steam Reforming of Methanol over Cu/ZnO/Al2O3 Catalyst
محل انتشار: کنفرانس بین المللی مدل سازی غیر خطی و بهینه سازی
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,091
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICNMO01_337
تاریخ نمایه سازی: 19 اسفند 1391
چکیده مقاله:
A kinetic model for oxidative steam reforming of methanol (OSRM) has been developed using Langmuir–Hinshelwood (LH) approach over Cu/ZnO/Al2O3 catalyst.The kinetic model incorporates the partial oxidation of methanol, steam reforming of methanol and reverse water–gas shift reactions for the OSRM process. The majorproducts of steam reforming of methanol were hydrogen and carbon dioxide with small amount of carbon monoxide which is formed as a secondary product. Onedimensional heterogeneous plug flow model was employed to model an adiabaticfixed-bed reactor for the catalytic steam reforming of methanol. Longitudinaltemperatures predicted by this model were compared to those experimentally measured in a bench scale reactor. The reactor was packed with 5 mm pellets and operated in a temperature range of 503-543 K at an atmospheric pressure. According to the results, the maximum conversion is obtained at 543 K with WHSV of 15 h-1.
کلیدواژه ها:
نویسندگان
Samaneh Hassanpour
Department of Chemical Engineering, Babol University of Technology, P.O. Box ۴۸۴, ۴۷۱۴۸۷۱۱۶۷ Babol, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :