Numerical Analysis of Hydraulic Fracture Operation in Oil Reservoir Using ABAQUS Software
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,403
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICOGPP01_674
تاریخ نمایه سازی: 22 مرداد 1391
چکیده مقاله:
Over the past decades, a number of studies have been carried out in the area of hydraulic fracturing. Basically, such technique has been in use for thepurpose of increasing production in oil and gas wells. Since hydraulic fracturing operation is a process of fracture extension in wellbore, rock crack is usuallyreviewed from the mechanics point of view. In this study hydraulic fracturing operation has been simulated using ABAQUS software. After definingthe direction of hydraulic fracturing using distribution of tensions around the well by FLAC3D software, extension of hydraulic fracturing indifferent lengths and tension distribution around the hydraulic fracture are reviewed using ABAQUS software. Hydraulic fracture aperture made in variousparts of fracture is another parameter which was reviewed. The effect of hydraulic fracture, in various lengths, on the production measure is also mentioned
کلیدواژه ها:
نویسندگان
Jaber Taheri Shakib
۱Department of Petroleum Engineering, Shahid Bahonar University of Kerman, Iran
Ebrahim Akhgarian
۲Department of Petroleum Engineering, Shahid Bahonar University of Kerman, Iran
Hossein Jalalifar
Petroleum Department, Environmental and Energy Research, Bahonar University of Kerman, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :