Assessment of ductility demand of base-isolated bridges located in Iran

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 460

فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد

این مقاله در بخشهای موضوعی زیر دسته بندی شده است:

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICRSIE01_161

تاریخ نمایه سازی: 25 آذر 1395

چکیده مقاله:

Conventional method for earthquake resistant design of bridges is to increase the strength and energy dissipation capacity of their components. This design philosophy prevents collapse of the bridge at the expense of accepting significant damage in its elements.Using seismic isolators is a fairly novel and modern design technique in this field. These bearings are used in earthquake prone regions for optimum design of new bridges and rehabilitation of existing bridges against earthquakes.In this project, these two design methods have been studied on one of the main highway bridges of Tehran. That is, the bridge has been studied once in isolated form (using LRB isolators) and then as non-isolated. The evaluation of these two plans has been performed using the results of non-linear dynamic time-history analyses obtained from direct integration by SAP 2000 software under five pairs of historic earthquake ground motions occurred in Iran. The results of the analyses, including the ductility demands, on isolated and non-isolated bridge models have been evaluated.The results demonstrated failure of the non-isolated model under the event of two pairs of the applied records, while in the isolated structure just formation of plastic hinges in some pillars was observed. Hence, bridge collapse during the incident of these severe earthquakes will be prevented by application of seismic isolators.Also both isolated and not-isolated bridges, did not fail and remained stable under the three other earthquake records. Furthermore, the isolated bridge, showed less ductility demands and more drifts compared to the non-isolated one

نویسندگان

Amir Halabiyan

West Tehran Branch, Islamic Azad University, Tehran, Iran. Department of Civil Engineering

Behnam Mehrparvar

West Tehran Branch, Islamic Azad University, Tehran, Iran. Department of Civil Engineering

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • CSI Analysis Reference Manual For SAP 2000T, ETABST, SAFE@) and ...
  • Mayes, R.L, Buckle, I.G, Kelly, T . E. and Jones, ...
  • Zahraii , M, Introduction o seismic isolators and their effects ...
  • Wikipedia (2010). Base Isolation ...
  • http ://en.wikipedia. org/wiki/B ase_isolation _ (accessed 22. may.2010) ...
  • Zahraii, M, Khoraminejad, A, Response modification factor of concrete bridges ...
  • Zahraii M, Mohammadi M M, Enhancing the safety of bridges ...
  • Zahraii M, Sami H, Seismic assessmemt of bridges with existing ...
  • Hexa Consultant Engineers (2011). Report of technical calculations related to ...
  • Department of Strategic monitoring and administrativ and technical system office ...
  • British Standard. BS 5400-4: (1990). Steel, concrete and composite bridges-Part ...
  • Deputy of Strategic Planning and Control (2011), Guideline for seismic ...
  • Regulation of structures design against earthquake, standard 2800, edition 4 ...
  • Internationl Conference on researches in Science and Engineering 28 July ...
  • Strategic monitoring department and administrativ and technical office and Transportation ...
  • Habibullah, Ashraf and Wilson, Edward. Translation: Davod Nabi , Seyed ...
  • Seismic Retrofitting Manual for Highway Structures - Part 1 (2006) ...
  • نمایش کامل مراجع