Efficient Inverted organic solar cell by using optimized buffer layers insertion
محل انتشار: کنفرانس بین المللی پژوهش در علوم و مهندسی
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 464
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICRSIE01_193
تاریخ نمایه سازی: 25 آذر 1395
چکیده مقاله:
In this paper we have proposed inverted organic solar cell based on conjucated P3HT:PCBM as active layer and ZnO as an electron transfer, hole blocking layer and P3HT as hole transfer layer. We have simulated the structure without ZnO and with various thickness of ZnO layer. Results show that ZnO layer optimizes IOSC parameters. It has demonstrated that proposed inverted organic solar cell with P3HT as HTL layer has better performance than structure with PEDOT:PSS buffer layer. power conversion efficiency of structure obtained in optimized ZnO layer of 28nm is 3.38 times of structure without ZnO layer. The parameters of Structure with P3ht anode buffer layer, 86% ,Voc=17.88%, FF=21.25% percent were optimized compared to structure with PEDOT:PSS layer.
نویسندگان
Roghayyeh khalili
Department of Electrical Engineering. Ahar Branch, Islamic Azad University, Ahar, Iran
kambiz abedi
Shahed beheshtee university, Department of Electrical Engineering, Tehran, Iran