Appraisement of steel moment frame system with intermediate ductility 3rd and 4th Revision Iranian Code of Practice for Seismic Resistant Design of Buildings ( Standard No.2800 Iran)

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,287

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICSAU02_0596

تاریخ نمایه سازی: 16 خرداد 1394

چکیده مقاله:

Seismic correct operation requires that available strength and deformation capacity of structural members must greater than the requirements imposed by earthquakes. According to the behavior of structures during earthquakes, structural performance evaluation should be done by non-linear analysis. Entering the structure to non-linear behavior under earthquake, displacements have been better described than in the forces of structural response and by limiting the displacements instead of forces, level of structure damage can be controlled effectively. Due to the growing advances in earthquake engineering knowledge and the successive need to revise in the regulations codified, the philosophy codified and prepared regulations is important for graduates in this field. Despite its importance, in this article we review some clauses of the Code of Practice for Seismic Resistant Design of Buildings (Standard No.2800 Iran) with fourth edition and provide the basic concepts and philosophy of codification and preparation of these clauses compared with the third edition. In this paper, appraisement steel moment frames 3 floors, 6 floors and 10floors will consider with intermediate ductility and non-linear static structural analysis (pushover) was performed with SAP software.

کلیدواژه ها:

نویسندگان

Mohammad Bavandi

Student MSc, Department of civil engineer, Ayatollah Amoli Branch, Islamic Azad University, Amol, Iran

Gholam Reza Ghodrati Amiri

Professor, Science & Technology, Tehran,Iran

Mohammad Shamekhi Amiri

Professor, Institute of science & technology Aryan,Babol,Iran,

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • 3th Revision IranianCode of Practice for Seismic Resistant Design of ...
  • 4th Revision IranianCode of Practice for Seismic Resistant Design of ...
  • Chopra AK, Goel RK. A modal pushover analysis procedure to ...
  • Chopra AK. DYNAMICS OF STRUCTURES Fourth Edition. One Lake Streetj ...
  • Chopra AK, Goel RK, Ch intanapakdee C. Evaluation of a ...
  • Chopra AK, Goel RK. A modal pushover analysis procedure to ...
  • Chopra AK, Goel RK. Role of higher-mode pushover analyses in ...
  • نمایش کامل مراجع