The Production of Al/Al2O3Composite Strips Using a New Method
محل انتشار: دومین کنفرانس بین المللی آلومینیوم
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,105
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC02_026
تاریخ نمایه سازی: 12 اردیبهشت 1392
چکیده مقاله:
In this work, particle reinforced aluminum composite strips with 2 and 4 wt% of Al2O3 were obtained from powder mixture using powder metallurgy (P/M), mechanical alloying (MA), and vacuum hot pressing (VHP) were followed by hot rolling process. The microstructural evolution and mechanical properties of Al/Al2O3 composite strips were evaluated. Optical microscopic investigations of hot rolled aluminum matrix composite (AMC) were done to study the redistribution of alumina particles in the matrix and also the morphology of Al2O3 particles after 90% thickness reduction. The effect of alumina content in the matrix on hardness, tensile strength, and elongation was examined. Scanning electron microscope (SEM) was used for evaluation of fracture surfaces after tensile test and also aluminum-alumina interface.
کلیدواژه ها:
نویسندگان
Majed Zabihi
Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶-۸۳۱۱۱, Iran
Mohammad Reza Toroghinejad
Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶-۸۳۱۱۱, Iran
Ali Shafyei
Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶-۸۳۱۱۱, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :