Improvement of coating adhesion to aluminum alloys by the application of anodic film interlayer

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,175

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IIAC02_044

تاریخ نمایه سازی: 12 اردیبهشت 1392

چکیده مقاله:

Adhesion of coatings to aluminum components is a critical factor due to the presence of a surface oxide film that prevents intimate contact between coating and the metal. In this research, two different types of interlayers were produced on aluminum alloy specimens prior to electroless nickel coating in an attempt to improve the low adhesion of such coatings to aluminum substrates. The amorphous Ni-P layer of medium phosphorous content was deposited on 3004 aluminum alloy sheet after an interlayer of either a zinc coating (zincate process) or an oxide coating (anodizing process) was applied to the substrate. Formation of electroless coating was evaluated by X-ray Diffraction and microanalysis (EDS). The surface morphology and topography of the coatings were characterized by scanning electron microscope (SEM) and atomic force microscope (AFM), respectively. Adhesion of the coating to aluminum substrate was evaluated by the bending test according to ASTM B571. It was observed that application of a nano-porous aluminum anodic oxide as interlayer effectively increased the adhesion of electroless Ni-P coating to aluminum surface; the adhesion strength was considerably more than that obtained by the presence of zincate interlayer.

نویسندگان

S. Shirmohammadi

Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶-۸۳۱۱۱, Iran

F. Ashrafizadeh

Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶-۸۳۱۱۱, Iran

A. Hakimizad

Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶-۸۳۱۱۱, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • M. Kamiya, T. Yakou, T. Sakaki, Y. Nagatsuma, "Effect of ...
  • M. Shiota, "Recent trend of casting and die casting aluminum ...
  • X. Li, X. Nie, L. Wang, D. O. Northwood, "Corrosion ...
  • In this investigation, two types of intermediate layers binary alloy ...
  • M. Yabe, "Pretreatment for diffi cult-to-plate metal", [13] K. W. ...
  • D. Takacs, L. Sziraki, T. I. Torok, J. Solyom, Z. ...
  • F. Ashrafizadeh, "Adhesion Evaluation of PVD alumina films and integrated ...
  • Bonded Bimaterials", Procedia Engineering, 10 (2011) [17] J. D. Venables, ...
  • J. Chen, G. Yu, B. Hu, Z. L. U, L. ...
  • EValova, J. Dille, S. Armyanova, J. Georgieva, D. manufacturing Al/Al2O3 ...
  • Electroana lytical Chemistry, 600 (2007) 63-79. ...
  • L. Libo, B. Liu, "study of Ni-catalyst for electroles Ni-P ...
  • Surf Fin Sci Soc Jan. 48 (1997) 522-529. ...
  • kanadani, "Effects of zincate treatment _ adhesion of Jeong, Trans. ...
  • electroless Ni-P coating onto various aluminum alloys", Morphology Effects on ...
  • Keller, W. G. Zelley, "Conditioning aluminum alloys 2585-2590. for electroplating", ...
  • A. Hubin, "Interface between electroless amorphous Ni- [19] A. M. ...
  • Cu-P coatings and Al substrate", Surface & Coatings behaviour of ...
  • inluence of cobalt on the corrosion resistance and depositson A1 ...
  • e lectromagnetic _ hielding of electroless Ni-Co-P Pergamon, 31 (1990) ...
  • J. G. Jin, S. K. Lee, Y. H. Kim, "Adhesion ...
  • improvement of electroless plated Ni layer by ultrasonic agitation during ...
  • نمایش کامل مراجع