The effect of a novel solution treatment on microstructure and mechanical properties of AA7075 using the Taguchi method

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 570

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IIAC03_057

تاریخ نمایه سازی: 9 فروردین 1395

چکیده مقاله:

In this work, age hardening behavior of AA7075 by means of cyclic heat treatment was studied. The temperature and time of solutionizing and aging were optimized by the Taguchi method. The optimal heat treatment condition was found to be solutionizing at 425 and 465 °C for 2 h and aging at 140 °C for 24 h. The signal-to-noise (S/N) ratio and analysis of variance (ANOVA) revealed that the aging temperature was the most significant factor. The results showed a considerable enhancement in the hardness properties of the material using the new method compared to the conventional T6 treatment

نویسندگان

Seyed Mahmoud Bayazid

School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box 11155-4563, Tehran, Iran

Hassan Farhangi

School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box 11155-4563, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Heinz, A, Haszler, A., Keidel, C., Moldenhauer, S., ...
  • Engineering 10, (2011) 3117-3121. ...
  • materials science 44, no. 23, (2009) 6384-6391. ...
  • Snblert, George Robert, "Heat treatment of aluminum, " J.S. Patent ...
  • R. T. Holt, M. D. Raizenne and W. Wallace Structures, ...
  • K. Ural, _ study of optimization of heat treatment ...
  • Brown, Melvin H, "Three-step aging to obtain high ...
  • Campbell Jr, Flake C., ed, _ Manufacturing processes for advanced ...
  • Di Russo, E., M. Conserva, F. Gatto, and H. Markus, ...
  • Tavassoli, A. A, "Effect of Deformation _ Pre c ip ...
  • Paton, N. E., and A. W. Sommer, "Influence of thermome ...
  • Thermo mechanical Processing Treatments on Properties of Aluminum Alloys, Micro ...
  • Es-Said, Omar S., William E. Frazier, and Eui W. Lee, ...
  • نمایش کامل مراجع