Ecosafe Plus: innovation and sustainability in hydraulic fluids

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 498

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IIAC03_072

تاریخ نمایه سازی: 9 فروردین 1395

چکیده مقاله:

Foundry Alfe CHEM has developed and tested a new product which represents a breakthrough in the class of non-flammable hydraulic fluids. Ecosafe Plus is a biodegradable hydraulic fluid particularly suitable to be used in hydraulic circuits located near sources of heat, due to its complete non-flammability. Ecosafe Plus formulation is glycol-free and, compared to traditional water/glycol based hydraulic fluids, it allows for easy disposal of the exhausted fluid and environmental safety. For what concern the technological properties, Ecosafe Plus has a greater compatibility with most of the seals and the elastomers normally used in hydraulic plants. Ecosafe Plus has also been credited, according to OECD 310 F, as biodegradable. In addition, Ecosafe Plus has been tested by accredited laboratories with tribological trials (4 Ball wear test ASTM D 4172, Ball on disc test ASTM D 6425, Brugger test DIN 51347, Vickers test ASTM D 2882). In particular, the Vickers test has shown a value of wear of the vanes, of the stator and of the rotor equal to 25% than the one measured after the same period with the competing product; this means that Ecosafe Plus has anti-wear performances and active lubrication four times higher than the traditional products

نویسندگان

Gianni Rizzuto

Foundry Alfe CHEM s.r.l., Turin, 10152, Italy

Fiorenzo Bucelli

Foundry Alfe CHEM s.r.l., Turin, 10152, Italy

Marco Sciaccaluga

Foundry Alfe CHEM s.r.l., Turin, 10152, Italy

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • ASTM Standard D471, 2012a, _ Standard Test Method for Rubber ...
  • OECD 301 F, 1992, :OECD Guidelines for the Testing of ...
  • Degradation and Accumulation _ OECD, 1992, DOI: 10. 1 78 ...
  • ASTM D4172, 1994(2010), :Standard Test Method for Wear Preventive Characteristics ...
  • ASTM D6425, 2011, :Standard Test Method for Measuring Friction and ...
  • نمایش کامل مراجع