Influence of welding parameters on microstructure and mechanical properties of friction stir welded Al-Mg2Si metal matrix composite

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 725

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IIAC03_076

تاریخ نمایه سازی: 9 فروردین 1395

چکیده مقاله:

In this research, friction stir weldability of 20wt.% Mg2Si particulate aluminum matrix composite and effects of FSW process on the microstructure and mechanical properties of the joints were investigated. Mechanical properties including microhardness and tensile strength were evaluated in detail. The results showed fragmentation of Mg2Si particles and Mg2Si needles existing in eutectic structure in stir zone.Also, homogeneous distribution of Mg2Si particles was observed in the stir zone as a result of stirring with high plastic strains. This research indicates that friction stir welding is a good candidate for joining of 20 wt.% Mg2Si aluminum matrix composite

کلیدواژه ها:

Friction stir welding ، Microstructure ، Mechanical properties ، Al-Mg2Si metal matrix composite

نویسندگان

a Moharrami

Imam Khomeini International University, Qazvin, Iran

a rezaghian

Imam Khomeini International University, Qazvin, Iran

m emamy

School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Homogeneous distribution of Mg, Si particles as well as spheroidization ...
  • Band-like arrangement of Mg, Si particles and Mg2Si needlles was ...
  • Pirondi A, Collini L. Analysis of crack propagation resistance of ...
  • Nami H, Adgi H, Sharifitabar M, Shamabadi H Microstructure and ...
  • ASTM Standard E8. standard test method for tension testing of ...
  • Karthikeyan L, Senthilkumar VS, Padmanabhan KA. On the role of ...
  • Guerra M, Schmidt C, McClure JC, Murr LE, Nunes AC. ...
  • Cheng CI, Lee CJ, Huang JC. Relationship between grain size ...
  • Elangovan K, B alasubramanian V. Influences of pin profile and ...
  • Dieter GE. Mechanical metallurgy. _ McGraw Hill; 1988. ...
  • G. Minak , L. Ceschini , I. Boromei , M. ...
  • _ Mag 25-26, 2014, Tehran, I.R. Iran [5] Qin QD, ...
  • Qin QD, Zhao YG, Zhou W. Dry sliding wear behavior ...
  • Amirizad M, Kokabi AH, Abb asiGharacheh M, Sarrafi R, Shalchi ...
  • Srivatsan TS, AL-Hajri M. The fatigue and final fracture behavior ...
  • Gomez de Salazar JM, Barrena MI Dissimilar fusion welding of ...
  • Marzoli LM, Strombeck AV, Dos Santos JF, Gambaro C, Volpone ...
  • Chen XG, da Silva M, Gougeon P, St-Georges L. Microstructure ...
  • Guo J, Gougeon J, and Chen, Characteriz ation of welded ...
  • _ Mag 25-26, 2014, Tehran, I.R. Iran ...
  • نمایش کامل مراجع