Fabrication and characterization of Al-matrix composites reinforced whit carbon nanotube
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 378
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC04_046
تاریخ نمایه سازی: 22 دی 1396
چکیده مقاله:
In recent years, there has been increased attention to carbon nanotube-reinforced metal matrix composites due to their high tensile strength as well as exciting thermal and electrical characteristics. In this study, aluminium matrix composite reinforced with multi-wall carbon nanotubes were fabricated by hot pressing. Mechanically milled micron-sized pure aluminium with 0.5wt%, 1wt%, and 2wt% multi wall carbon nanotubes (MWNT), are used to fabricate the samples. In order to obtain optimum pressing condition, mechanical properties (hardness and compressive strength) and densification behaviour of pressed samples at different times and temperatures were measured. Mechanical properties results showed that, carbon nanotubes improve compressive strength and hardness of pure aluminium significantly.
کلیدواژه ها:
نویسندگان
Leila Shahrdami
Materials Engineering Department, Imam Khomeini International University(IKIU), Qazvin, P.O. Box: ۳۴۱۴۸-۹۶۸۱۸, Iran
Leila Shahrdami
Materials Engineering Department, Imam Khomeini International University(IKIU), Qazvin, P.O. Box: ۳۴۱۴۸-۹۶۸۱۸, Iran
arman sedghi
Materials Engineering Department, Imam Khomeini International University(IKIU), Qazvin, P.O. Box: ۳۴۱۴۸-۹۶۸۱۸, Iran