microsturctural and mechanical investigation of friction stir welded A15083-H321
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,173
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_027
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
friction stir welding FSW has received a great deal of attention as a new solid state welding technique . In the present study the microstructure and the mechanical property of FS-welded 5083-H321 aluminum alloy and the effect of friction stir welding parameters on the amount of axial load during the welding of A1 5083 has been investigated . the microstructures of the stir zones consisted of fine equiaxed grains at various FSW conditions in FS-welded 5083 A1 alloy the size of the crystal grain in SZ is about 8mm in different welding parameters it was found that increasing the tool rotation rate will increase the axial loads this increase can be related to the material flow in the thickness direction of the plate.
کلیدواژه ها:
نویسندگان
a.r yazdipour
malek ashtar industerial university
a.m nasiri
sharif university of tehran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :