Preparation of ceramic matrix nanocomposites using Ni-Co coated Al2O3 nanoparticles
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 943
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES06_187
تاریخ نمایه سازی: 8 بهمن 1391
چکیده مقاله:
New classes of advanced ceramic matrix nanocomposites based on Ni-Co coated Al2O3 nano particles,are introduced in this article. This kind of nanocomposites can be used as the catalysts, electromagnetic wave absorbing materials, contactors, switches and etc, because of their excellent properties such as good electrical and thermal conductivities and excellent corrosion and wear resistance. Al2O3–Ni-Co nanocomposite powders were fabricated by Electroless plating of Ni-Co on Al2O3 particles. Bulk samples of nanocomposites were prepared under subsequent cold pressing and sintering processes of thepowders. The results shows that, by growing of copper on the surface of the cu nucleies, by electroless deposition, a continuous Ni-Co shell within about 20nm thickness are formed around the Al2O3. Uniaxially cold pressure of 400Mpa and sintering at 1200°C leads to the formation of dense and uniform distributed nanocomposite samples.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :