definition a new dimensionless parameter on geometric ones affecting the chevron crack formation in an extrusion process
محل انتشار: دومین همایش بین المللی و هفتمین همایش مشترک انجمن مهندسی متالورژی ایران و انجمن علمی ریخته گری ایران
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,161
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES07_140
تاریخ نمایه سازی: 28 آذر 1392
چکیده مقاله:
The central burst defect, also called chevron crack, in the extruded products is analysed by using 2D finite element analysis (FEA) to investigate the effects of affecting parameters on its formation, the three main ones are: cone angle, reduction and friction. By simulating an extrusion process in ABAQUS and changing these variables, some of the results like Von Mises stress, hydrostatic stress and strain in the longitudinal direction are discussed. Due to these results, some curves have been developed to show the safe and dangerous zone to the formation of chevron cracks. The results are also compared with some available experimental data. Also, for reducing the number of variables, a new dimensionless parameter is defined which combine two geometric ones, cone angle and reduction in area. It is suggested that this parameter can satisfy the effects of both of them; it means that as it is increased, whether due to the increasing in the cone angle or decreasing in the reduction in area percentile, the probability of chevron crack formation will be increased.
کلیدواژه ها:
نویسندگان
mohsen Khajeh Salehani
Center of Excellence in Design, Robotics and Automation, Department of Mechanical Engineering, Sharif University of Technology,
Ahmad Assempour
Center of Excellence in Design, Robotics and Automation, Department of Mechanical Engineering, Sharif University of Technology, P.O. Box ۱۱۳۶۵-۹۵۶۷, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :