Scrutiny of Environmental, Health and Safety Risk in Alloy Steel Factory Based on Process Failure Mode & Effect Analysis Method (PFMEA)

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 879

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

INDM05_086

تاریخ نمایه سازی: 11 خرداد 1393

چکیده مقاله:

This research evaluates the risk of the overall process of estimating the rate of risk and decision making concerning its acceptability. The research has been carried out to evaluate the Environmental, Health and Safety (EHS) risk of Jafari Alloy Steel Factory which is located SHAZAND and Malayer in West of Iran. For this purpose, the potentially harming factors of the factory were identified after the environment of the region under the influence and various activities and processes had been identified. Then, they were classified according to their possible occurrence and the intensity of their effects on human, environment and capital. Due to the vastness and variety of the activities performed in Jafari Alloy Steel Factory, the evaluation of the EHS risk was concerned in the producing and regenerating unit. Failure Mode and Effect Analysis (FMEA) has been applied. A comparison between the rate of RPN factors (Risk Priority Number) in this unit shows that the Risk Priority Number in mechanical lifts activity with 160 degrees (high degree) in the first level, and the lowest number is 24 belonging to elevator. With relative raise of members of employers in this unit in 2012 in compare with the year before, severity, occurrence and number of accidents in both parts employers and contractors shows 32% reduction on the average. Also numbers of lost days due to accidents and medical costs in these mentioned years at least 28% has been decreased.

کلیدواژه ها:

Environmental ، Health and Safety Risk – Process Failure Mode & Effect Analysis Method (PFMEA) - Alloy Steel Factory

نویسندگان

amin padash

PhD Candidate of Environmental Planning at University of Tehran- Alborz Campus and Member of Department of Industrial Ecology at Technology Development Institute, Iranian Academic Center for Education, Culture & Research (ACECR) – San’ati Sharif Unive

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Arielpinto C, . 2004. The security Incident cycle of ports, ...
  • Bahr, N.J, . 1997. System Safety Engineering and Risk Assessment: ...
  • Burke, R, . 2006. Project Management Planning and Control Techniques, ...
  • Carbone, Thomas A. and Donald D. Tippett, 2004. "Project Risk ...
  • Cornelsin, J.D, . 1999. MORT Based Root Cause Analysis, WP-27, ...
  • Friedman, L.J, . 2005. The Utility Analysis of Choices Involving ...
  • G.Q. Huang, J. Shi and K.L. Mak, 2000. :Failure Mode ...
  • Hammer, K. 2002. Handbook of safety and Product Safety, Mc ...
  • Henley, E.J, .2003. Probablistic Risk Assessment, Reliability Engineering, Design and ...
  • Hilson, D, . 2002. Extending the Risk Proces to Manage ...
  • Judith, P, . 2007. Handbook of Enviro nmental Impact Assessment, ...
  • LEE, s. 2004. "Using FMEA to Develop Alternatives to Batch ...
  • Pai, Roshan R., Venkata R. Kallepalli, Reggie J. Caudill and ...
  • Pillay, Anand and Jin Wang, 2003. :Modified Failure Mode and ...
  • Rirlova, Katarna. 2007. _ OF RISK MAN A GEMENT : ...
  • Stamatis, D.H., 1995. Failure Mode Effect Analy sis-FMEA From Theory ...
  • U.S Department of Energy. 1 997.Accident Incident Investigation Manual, SSDC ...
  • Walewski, John A., Edward G. Gibson and Vines F.Ellworth, July ...
  • نمایش کامل مراجع