A New Method for Estimating Original Hydrocarbon in-place Using Available Production Data
محل انتشار: دومین کنگره مهندسی نفت ایران
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,719
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IPEC02_141
تاریخ نمایه سازی: 22 خرداد 1391
چکیده مقاله:
Material Balance calculations for determining oil or gas in-place are based on obtaining static reservoir pressures as a function of cumulative production. This requires the wells to be shut-in, in order to determine the average reservoir pressure.The Dynamic Material Balance is applicable to either constant flow rate or variable flow rate, and can be used for both gas and oil. The Dynamic Material Balance is a procedure that converts the flowing pressure at any point in time to the average reservoir pressure that exists in the reservoir at that time. Once that is done, the classical material balance calculations become applicable, and a conventional material balance plot can be generated.The procedure is graphical and very straightforward: a) knowing the flow rate and flowing sandface pressure at any given point in time, convert the measured flowing pressure to the average pressure that exists in the reservoir at that time; b) use this calculated average reservoir pressure and the corresponding cumulative production, to calculate the original oil or gas in place by traditional methods. The method is illustrated using data sets
نویسندگان
m Kheirandish
Department of Petroleum Engineering, Petroleum University of Technology, Ahwaz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :