OPTIMIZING THE CONFIGURATION OF AN ACTIVE NOISE AND VIBRATION CONTROL SYSTEM USING PARTICLE SWARM METHOD
محل انتشار: پانزدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,602
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME15_580
تاریخ نمایه سازی: 8 فروردین 1386
چکیده مقاله:
In many active noise and vibration control system it is desired to reduce the vibration and also the noise emitted by flexible structure. With this objective the task of the controller is to control maximum number of modes allowed by the control system limitations. Several key parameters in the control system design for this purpose are the location, number and size of actuators and sen sors on a flexible structure. In this paper a simply-supported thin plate with laminated piezoelectric sensors and actuators is considered with the aim of reducing the vibrations and noise emitting from it. For this purpose, a performance index based on Hankel singular values of the system is selected. The resulting nonlinear optimization problem is solved using a new Particle Swarm Optimization (PSO) algorithm. The results are also verified with a state-feedback
controller.
کلیدواژه ها:
Swarm optimization ، Active Vibration Control ، Piezoelectric sensors and actuators ، Optimal placement
نویسندگان
Allahyar Montazeri
PhD student Iran University of Science and Technology, Tehran
Saeid Shojaei
M.Sc. Student Azad University, Science and Research Branch, Tehran
Javad Poshtan
Associate Professor Iran University of Science and Technology, Tehran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :