Stress Concentration Analysis of Fiber-Reinforced Multilayered Composites with Two Serial Pin-Load Holes
محل انتشار: هجدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,730
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME18_072
تاریخ نمایه سازی: 1 تیر 1389
چکیده مقاله:
The objective of this paper is to investigate the effects of geometric parameters such as, edge distance to pin diameter ratio e/d, pins center to center distance, and size of each pin hole on stress distribution in a unidirectional composite laminate subjected to a tensile load at infinity. The solution is obtained analytically as well as numerically, using finite element technique. It is assumed that all long and short fibers (cut between any two successive pin holes) lie in a finite width laminate. The analytical solution is obtained using shear-lag theory. The resulting pin loads on composite plate are modeled through a series of spring elements accounting for pin elasticity. The analytical results on stress concentration factors were compared to those of finite element values. A close match is observed between the two methods. Also the effect of two pins in series is examined on stress distribution in the laminate.
کلیدواژه ها:
نویسندگان
Mohammad shishesaz
Professor, Shahid Chamran University, Ahwaz, Iran
Mohammad Mahdi Attar
Ph.D Student, Azad Islamic University, Science and Research Branch
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :