Forming of Aluminium Alloy 1200 Using an Experimental-Numerical Method Based on Triaxiality Factor
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 319
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME26_636
تاریخ نمایه سازی: 30 دی 1397
چکیده مقاله:
Fonning of aluminium alloy 1200 is studied.Aluminium alloy 1200, which contains 99% of aluminitun, due to its good corrosion resistance, especially in aqueous media. has many applications in heat exchangers and food and chemical handling and storage equipment. In this study a failure curve is developed based on plastic strain and triaxialityfactor to be used as a forming limit diagram for this material. Hill 1948 plasticity model is used in this study. Experiments on specimens machined in different directions are done to extract the material properties of plasticity model. A set of complementary finite element analysis is done to finalize the plasticity constants and hardening curve.To develop a failure curve based on plastic strain and triaxiality factor, different notched specimens with different state of stress at minimum section are tested and simulated. To validate the failure curve, an Ericson test is done and the failure curve developed is capable of predicting failure with good accuracy.
کلیدواژه ها:
نویسندگان
arash keshavarz
’Assistant Professor, Islamic Azad University, Karaj Branch;
hossein mollaei
MS Graduate, Islamic Azad university Karaj Branch