Feasibility Study of Cultivation of Vegetables Using a Native Planter in Khuzestan
سال انتشار: 1393
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 492
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJABBR-2-12_007
تاریخ نمایه سازی: 26 اسفند 1394
چکیده مقاله:
Objective: In recent years, farmers have shown great interest to using native drill planter rather than complex planters to grow vegetables. Methods: In this study, we tested a native planter Independent variables were the two types of substrate surface (asphalt and plowed field), three ground speed (3, 5 and 7 kph) and four types of seeds (tomatoes, onions, radishes and lettuce). Dependent variables were the seeds lateraldispersion coefficient compared to the straight line, seed shedding rate per unit area.effect Percentage of metering device on seed viability, and breakage percentage of seedsafter crossing the metering device. Results: The results showed that, the rate of seed shedding per hectare declines in all seeds along with increasing ground speed. However the lateral dispersion coefficient of the straight line planting has increasing trend alongwith increasing ground speed and the both parameters are lower in asphalts substratesurface than the cultivated ground. breakage percentage of seeds and effect Percentageof metering device on the viability of seeds after passing through the planter are also very low. It assume that use of the planter in front of method of hand cultivation reduce some costs such as costs of seeds purchase
کلیدواژه ها:
نویسندگان
Zahra Mohammadiamini
Msc. Student, Department of Mechanics of Agricultural Machinery and Mechanization, Faculty of Agriculture, Shahid Chamran University, Ahvaz, Iran
Yaghob Mansori
Assistant Professor, Department of Mechanics of Agricultural Machinery and Mechanization, Faculty of Agriculture,Shahid Chamran University, Ahvaz, Iran
Hassan Zaki Dizaji
Assistant Professor, Department of Mechanics of Agricultural Machinery and Mechanization, Faculty of Agriculture,Shahid Chamran University, Ahvaz, Iran