Determining an Economically Optimal (N,C) Design via Using Loss Functions

سال انتشار: 1391
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 878

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJE-25-3_001

تاریخ نمایه سازی: 17 خرداد 1393

چکیده مقاله:

In this paper, we introduce a new sampling plan based on the defective proportion of batch. The proposed sampling plan is based on the distribution function of the proportion defective. A continuous loss functionis used to quantify deviations between the proportion defective and its acceptance quality level (AQL).For practical purpose, a sensitivity analysis is carried out on the different values of the required sample sizes that allow practitioners to design near optimal inspection plans. A numerical example is presented to illustrate how the proposed procedure can be applied to design acceptance plans.

نویسندگان

m.s fallahnezhad

Industrial Engineering Department, University of Yazd, Yazd, P.O. Box ۸۹۱۹۵-۷۴۱, Iran

m.b fakhrzad

Industrial Engineering Department, University of Yazd, Yazd, P.O. Box ۸۹۱۹۵-۷۴۱, Iran